1. Specifications

320、330、340、350、360、380、3100、3120、3150、3180、3200、3250、3300、340D

2. Overview

The intelligent energy-saving lighting controller is a high-performance product developed based on microprocessor technology and advanced modern power electronics technology. It can effectively reduce and limit voltage, extend the service life of lamps, reduce maintenance costs, and lower the workload of maintenance personnel. The energy-saving effect can reach 10% -35%, with low investment and quick results. The intelligent energy-saving lighting controller adopts comprehensive anti-interference and lightning protection technologies in software and hardware design, and fully considers the convenience of user use. The whole machine adopts an integrated design with a fully Chinese display interface, making operation simpler and more convenient. It is equipped with RS-485 interface, which can upload output voltage and current to the upper computer and achieve remote control. Compliant with EMC standards (GB/T13926.4-92), capable of long-term safe and reliable operation.

3. Energy saving principle

The technical solution adopted by our company is to directly convert the mains power into "AC-AC". The working process of the system is based on the lighting needs of the equipment working site. The control strategy adopts a hybrid control strategy of "light control+time control". The intelligent control software embedded in the control circuit adjusts the duty cycle of the PWM control signal, and then adjusts the voltage amplitude of the equipment output to achieve the required lighting intensity on site.
Due to the influence of electricity consumption periods, the domestic power grid generally experiences nighttime voltage issues, which are caused by high voltage in the latter half of the night. In addition, the lighting requirements are not high in the latter half of the night, resulting in increased power consumption for lighting. The JN-S series products can set the voltage reduction range according to actual requirements to limit the power supply of lighting fixtures within a reasonable working range. Thus achieving energy-saving effect, the normal energy-saving effect is expected to be over 30%. The voltage regulation method is controlled by thyristor electronic voltage regulation, using IGBT voltage regulation, with no harmonic output and complete waveform distortion.
Four voltage periods can be set, each with different types of lighting fixtures, to meet the characteristics and lighting requirements of different lighting fixtures. The voltage reduction amplitude can be set separately to better balance the requirements of energy conservation and lighting.

4. Energy saving lighting function

◇遠程集中控制:標準MODBUS協議，通過RS485接口實現與控制中心之間的通訊,方便集控和能量統一管理。Remote centralized control: Standard MODBUS protocol, communication with the control center is achieved through RS485 interface, facilitating centralized control and unified energy management.
Priority should be given to ensuring the logical design of lighting, so that normal lighting power supply will not be affected due to system failure or damage.
◇ Small size, light weight, high efficiency, no mechanical or vulnerable parts, long device life.
◇ Output infinitely adjustable pure sine voltage, pollution-free to the power grid, suitable for various types of lighting loads.
Adjust the lighting intensity according to user needs, and the dimming speed can be set as needed, with limited energy saving while meeting the lighting requirements.
During the energy-saving process of dimming, there will be no turning off of the lights, which can protect the lamps and extend their service life.
◇ Without changing the user line, adopt single-phase control independent dimming for energy saving, and adapt to severe unbalanced loads.

5. Technical points

◇節能原理:采用高頻大功率電力電子器件實現電壓調幅《電力電子產品)◇ Energy saving principle: Using high-frequency high-power power electronic devices to achieve voltage amplitude modulation
◇ Output pure sine voltage, no pollution to the power grid
Voltage regulation range: continuously adjustable from input voltage of 160V
◇ Stepless pressure regulation, with a pressure gradient of 0.1VI level
The voltage regulation speed can be set as needed, shifting from 1V/1 to 1V/20 seconds
Dynamic voltage regulation ensures stable output voltage when the input voltage fluctuates
During the voltage regulation process, there is no current cut-off phenomenon, and the lights do not turn off or flash off
◇ Energy saving rate 15~~60% controllable

6. Functional Features

◇設備帶液晶屏顯示和控制功能，對系統工作的三相電壓、電流、溫度、累積運行時間等參數的實時監測;The equipment is equipped with a LCD screen display and control function, which enables real-time monitoring of parameters such as three-phase voltage, current, temperature, and cumulative operating time of the system;
◇ It has three-phase independent setting and adjustment function;
The equipment is equipped with three-phase independent bypass, and if one phase fails, it will automatically switch to the bypass without affecting the normal operation of the other two phases;
The device is equipped with an automatic memory function, which can store device fault codes and operational data from the previous 10 minutes of the fault;
The device has cumulative power on and cumulative operation functions;
◇ Built in clock operation function of the device
◇ The device has built-in three-phase temperature monitoring function;
The equipment is equipped with three-phase independent settings for 4 operating times;
When powered on, there is a light source preheating function: that is, it does not directly enter the energy-saving mode when powered on, ensuring that the lamp is fully ignited.
◇ It has an automatic reset function. When power is restored after a power outage, it starts at full voltage and automatically adjusts to the working state according to the working settings after the start is completed.
◇ It has protection functions such as phase loss, overheating, no-load, overload, automatic fault bypass, and fault output point.
Strong anti-interference ability, suitable for outdoor environments such as humidity, dust, and high temperature.
The device has illumination tracking function, which can automatically adjust the output voltage according to the external light sensing probe.
The lightning protection and grounding installation of the equipment comply with relevant specifications.

7. Technical parameters

Input voltage: 220V AC ± 20% 650Hz/60Hz, 220V DC ± 20% 6
Rated working current (per phase): 30A, 40A, 50A, 60A, 80A, 100A, 120A, 160A, 200A
◇ Output phase voltage setting range: 170V~220V
Output voltage accuracy: ± 1.5%, timing accuracy: ± 10 seconds, full voltage preheating time: l~60 minutes
◇ Insulation strength: weak current circuit to ground - power frequency 50OV for 1 minute
◇ Strong current circuit to ground - requires 1500V for 1 minute
◇ Between strong and weak circuits - Power frequency 1000 for 1 minute
◇ Cooling method: forced air cooling
◇ Working environment: In places without explosive gases and dust
◇ Environmental temperature:- 10℃～+55℃
◇ Storage environment temperature:- 25°℃～70°℃
◇ Relative humidity: ≤ 95% Function points